 | ||||||
|
|
|
|
|
||
| ||||||
| (700x525, 119kB) | (700x525, 116kB) | (700x525, 115kB) | (700x525, 108kB) | (700x525, 109kB) | ||
| 2007/10/21 18x48 plank ready to cut to length |
2007/10/21 Exposure set too high on the camera |
2007/10/21 Fence in place to rip the side to 35 inches |
2007/10/21 Finally corrected the exposure setting |
2007/10/21 The side ripped to 35 inches |
||
| ||||||
|
|
|
|
|
||
| ||||||
| (700x525, 107kB) | (700x525, 105kB) | (700x525, 94kB) | (700x525, 113kB) | (700x525, 112kB) | ||
| 2007/10/21 Transer the shape from the other side/template |
2007/10/21 Second side cut out (The side goes from 18 to ~11 inches) |
2007/10/21 Head and foot boards roughed out of one 24x48 sheet |
2007/10/21 Dry fit to make sure everything fits |
2007/10/21 Check to make sure the lines match up with the sides. |
||
| ||||||
|
|
|
|
|
||
| ||||||
| (700x525, 112kB) | (700x525, 112kB) | (700x525, 115kB) | (700x525, 112kB) | (700x525, 115kB) | ||
| 2007/10/21 Check the foot to make sure it matches up. |
2007/10/21 Rough out the foot board |
2007/10/21 Another shot of the foot board |
2007/10/21 Head board roughed out |
2007/10/21 The wind upset the woodworker and he finished for the day. |
||